Next Network NEXT-POE4008L2-130, Руководство пользователя

Страница: 81 / 147

81
▼
Configuration
▼
QoS
￭
Port Policing
PARAMETERS
：
Items Description
Port The port number for which the
configuration below applies.
Enabled Controls whether the policer is enabled on
this switch port.
Rate Controls the rate for the policer. The
default
value is 500. This value is restricted to
100-1000000 when the "Unit" is "kbps" or
"fps", and it is restricted to 1-3300 when
the
"Unit" is "Mbps" or "kfps".
Unit Controls the unit of measure for the
policer
rate as kbps, Mbps, fps or kfps . The
default
value is "kbps".
Flow Control If flow control is enabled and the port is in
flow control mode, then pause frames are
sent instead of discarding frames.
WEB Interface
To Configure QoS Ingress Port Policiers
：
A. Click Configuration/QoS/Port Policing.
B. Evoke which port need to enable the QoS
Ingress Port Policers and type the Rate
limitcondition
C. Scroll down to select Rate unit.
D. Click Save to apply the setting, Reset to
restore the previous setting.