Next Network NEXT-POE4008L2-130, Руководство пользователя

Страница: 57 / 147

57
▼
Configuration
▼
Port Trunking
￭
LACP
PARAMETERS
：
Items Description
Port Port Identifier
LACP Enabled Control whether LACP is enabled on this
switch port. LACP will from an aggregation
when 2 or more ports are connected to
the same partner. LACP can from max 12
LLAGs per switch and GLAGs per stack.
Key The Key value incurred by the
port.(Range
：
1-65535). The “Auto”
setting will set the key as appropriate by
the physical link speed, 10Mb=1,
100Mb=2, 1Gb=3. Using the specific
setting, a user-defined value can be
entered. The same key setting ports can
participate in the same aggregation group.
Role The Role shows the LACP activity status.
The “Active” will transmit LACP packets
each second, while “Passive” will wait for
a LACP packet from a partner.
WEB Interface
To Configure the LACP
：
A. Click Configuration/Port Trunking/LACP
B. Enable LACP on all of the ports in an LAG
C. Divide the LAG by different key
D. Set one Active role port in one LAG at least
E. Click Save to apply the setting or Reset to
restore the previous setting.