Nexo ems100 Скачать руководство пользователя страница 38

Страница: 38 / 62

Product Manual, Issue 4

ems100

www.nexo.com

Page 38

4.3

Door alarms ‘Limp home’ mode

The limp home aspect of this alarm ensures that the cooler continues to operate with limited disruption to

the end user while determining if the door switch or the door itself is at fault. The cooler will operate during

this period, cooling the products, while a service engineer visit is scheduled.

The table below describes how the ems100 Nexo controls the cooler during this time and what the end

user will see:

The controller manages

Display

Audio alarm sounds for the duration of the b1 (buzzer

duration) parameter.

d0 is displayed for

the duration of Ad

(alarm delay) and

b1 (buzzer duration)

parameters

The compressor switches off.

The RT compressor rest time parameter begins.

In normal operation, if DIS parameter is set to 1, the

controller display will alternate between

In normal operation, if DIS parameter is set to 0, the

controller display will alternate between

In saving mode the controller display will alternate

between

The compressor switches on when the SP (set point) and dIF (differential) are exceeded.

The compressor runs for a maximum of twenty (20) minutes.

The compressor switches off either; after twenty (20) minutes or when the appliance sensor

temperature has dropped to SP (set point) - whichever happens first.

The controller will repeat 3, 4, 5, 6, 7 and 8 for twenty (20) cycles or until a short circuit is seen on the

door input.

If set point is achieved within twenty (20) cycles the controller reverts to

normal operation. If DIS parameter is set to 1 the controller alternately

displays: d0/Temp.
An audio alarm sounds for ten (10) seconds, every ten (10) minutes.

If set point is achieved within twenty (20) cycles the controller reverts to

normal operation. If DIS parameter is set to 0 the controller alternately

displays: d0/USE.
An audio alarm sounds for ten (10) seconds, every ten (10) minutes.

All manuals and user guides at all-guides.com

Содержание ems100































































Результаты поиска

Содержание ems100

Отзывы:

Похожие инструкции для ems100

Бренды по названию

Популярные бренды

Nexo ems100, Руководство по эксплуатации продукта

Результаты поиска

Содержание ems100

Отзывы:

Похожие инструкции для ems100

Бренды по названию

Популярные бренды