manualshive.com logo in svg

Nexmosphere XT-EF Series, Руководство по эксплуатации продукта

Поделиться
Скачать
Nexmosphere XT-EF Series Скачать руководство пользователя страница 10

6. Quick test

In order to test if the XT-EF sensor is installed correctly, please follow the test procedure below:

© 2020 Nexmosphere. All rights reserved. v1.0 / 11-20  

All content contained herein is subject to change without prior notice

N ex m o s p h e re

Le   H av re   1 3 6
5 6 2 7   SW   E i n d h ove n   •   T h e   N e t h e r l a n d s

T

  + 3 1   4 0   2 4 0   7 0 7 0

E

  s u p p o r t @ n ex m o s p h e re.c o m

PRODUCT MANUAL | XT-EF SERIES AIR GESTURE SENSOR

10

Step 1 - Setup

First, connect the XT-EF sensor to an Xperience 
controller. Secondly, power the Xperience controller 
by plugging in the grounded power supply (see 
section 4.2, page 6 for more info) 

The white status LED of the XT-EF driver should go on.
The status LED of the controller will start to blink and 
once power-up is completed will be lit continuously

Step 2 - Test AirButton trigger

Place your hand above the XT-EF sensor electrode. 
Make sure your hand is placed well within the range 
of the sensor.

Both the white status LED of the XT-EF driver and the 
status LED of the controller should  blink once.

Step 3 - Test AirSwipe trigger

Swipe your hand above the XT-EF sensor electrode 
to the left or right. Make sure your hand is placed 
well within the range of the sensor.

Both the white status LED of the XT-EF driver and the 
status LED of the controller should  blink once.

For a full test we recommend to connect the setup to 
a mediaplayer or PC and test all API commands listed 
in this document (see section 3, page 2-5). For more 
information on how to setup a test for your controller, 
please  see  the  Quick  Start  Guide  of  the  Xperience 
controller  you  are  using.  These  are  available  on 

nexmosphere.com/support-documentation

Please contact 

[email protected]

 for any

support questions you may have.

In case any of the 3 steps above does not provide the
expected  result,  please  check  the  installation 
guidelines in this document. 

Grounded DC

Power supply

Xperience controller

X-talk cable

XT-EF Driver

XT-EF Electrode

XC

XT

XT

-EF650

tr

ansceiving side

LEFT

UP

DO

WN

RIGHT

XC

XT

XT

-EF650

tr

ansceiving side

LEFT

UP

DO

WN

RIGHT

LED BLINK

LED BLINK

Grounded DC

Power supply

Xperience controller

X-talk cable

XT-EF Driver

XT-EF Electrode

XC

XT

XT

-EF650

tr

ansceiving side

LEFT

UP

DO

WN

RIGHT

LED BLINK

LED BLINK

Grounded DC

Power supply

Xperience controller

X-talk cable

XT-EF Driver

XT-EF Electrode

Содержание XT-EF Series











Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды