© 2020 Nexmosphere. All rights reserved. v1.0 / 11-20
All content contained herein is subject to change without prior notice
N ex m o s p h e re
Le H av re 1 3 6
5 6 2 7 SW E i n d h ove n • T h e N e t h e r l a n d s
T
+ 3 1 4 0 2 4 0 7 0 7 0
E
s u p p o r t @ n ex m o s p h e re.c o m
PRODUCT MANUAL | X-EYE GENDER SENSOR
4 - Installation requirements and guidelines
When integrating an X-Eye Gender sensor into your digital signage installation, several installation requirements and guidelines
need to be taken into account in order for the sensor to perform optimal and operate stable.
4.1 Connection Diagrams
The X-Eye Gender sensor can be connected to any X-talk interface and is therefore compatible with all Xperience controllers.
Make sure the X-Eye Gender sensor is connected to the X-talk interface before powering the Xperience controller. Otherwise,
the X-Eye Gender sensor will not be recognized by the Xperience controller and no sensor output will be provided.
4
XN
this side up
X-Eye
DC Power supply
XC
this side up
X-Eye
4.2 Hardware integration guidelines
Orientation/placement sensor
Install the sensor in the orientation depicted in the
illustration on the right. In all other orientations, the sensor
will not provide any output.
The text "this side up" is placed on the front plane of the
sensor as a reminder and help.
Installation height
The sensor performs optimal when installed at eye height
or slightly higher. The recommend installation height
therefore is
160cm
-
180cm
.
Installing the sensor at a lower height and pointing upwards
towards a person's face will result into poor performance
of the sensor.
this side up
X-Eye
Example connection to XC Controller
Example connection to XN Controller
