NEXIQ Technologies Wireless Vehicle Link 2, Инструкция по установке и настройке

Страница: 79 / 89

78 WVL2™ Installation and Setup Manual
Chapter
5
• WVL2 Troubleshooting Information
Vehicle Application Issues
The following table lists some possible causes and solutions to issues that may be
experienced when attempting to use a vehicle application with the WVL2:
Problem Possible Causes Solution
Vehicle Appli-
cation reports
an error when
attempting to
connect to the
vehicle. • There may be a
wireless
communication
problem.
Verify that the WVL2 Explorer can
locate the WVL2. If not, refer to
“Wireless Communication Issues,”
earlier in this chapter.
• Wrong device
selected.
Verify that the vehicle application has
been properly configured for use with
the WVL2.
• Wrong Protocol
selected.
Some vehicle applications allow con-
nection to a vehicle using more than
one protocol. Verify that the proper
protocol has been selected in the
vehicle application.
• The WVL2
Explorer is
configured to
launch
automatically and
a time-out has
occurred in the
diagnostic
application.
Some vehicle applications report an
error if a connection does not occur
within a specified time-out. If this
happens, disable the
Connection
Manager feature in the WVL2
Explorer when using the problem
application.
• The vehicle
application
software is not
RP1210A
compliant. (TMC
Recommended
Practice RP1210A
defines a standard
Windows
Application
Program Interface
for vehicle
communications.)
Certain vehicle applications are hard
coded to use only specific hardware
and are not RP1210A-compliant.
These applications are not compati-
ble with the WVL2.
For assistance, contact NEXIQ™
Technical Support at:

1-800-639-6774.