NEXIQ Technologies Wireless Vehicle Link 2, Инструкция по установке и настройке

Страница: 77 / 89

76 WVL2™ Installation and Setup Manual
Chapter
5
• WVL2 Troubleshooting Information
Wireless Communication Issues
The following table lists some possible causes and solutions to issues that may be
experienced when attempting to set up the WVL2 for wireless communication:
You can check the connection status of the WVL2 by referring to the WVL2 icon
Problem Possible Cause Solution
WVL2 Explorer
cannot find the
WVL2. • No power received
from the WVL2.
Verify that the vehicle ignition is
on, then check the connections
between the WVL2 and the
vehicle.
• The WVL2 is out of
range, or is
improperly
configured.
Verify that the WVL2 is within
100 ft. of the wireless PC.
Verify that the following
settings are the same for the
WVL2 and the PC:
• SSID
• Communication Mode (Ad
hoc)
• Encryption Settings
• Wireless card is
missing from PC,
or is not properly
configured.
Verify that the wireless network
card is properly installed on the
PC, the appropriate drivers are
installed, and the card is
properly configured.
Be sure that the following
match for all devices on the
same network:
• SSID
• Communication Mode (Ad
hoc)
• Encryption Settings
• Access Point is
OFF, out of range,
or improperly
configured
(Infrastructure
Mode only).
Verify that the Access Point is
operational and within range
(100 ft.) of the PC and WVL2.
Ensure that the Access Point is
configured for the same SSID
and Encryption Settings as the
PC, and that the WVL2 is on
the wireless network.