Nexgrill The Classic 720-0083-04R, Инструкции по сборке и эксплуатации

Страница: 16 / 34

then push the meat forks firmly together.
Tighten the wing nuts as tight as possible.
It may also be necessary to wrap the food
with butchers string (never use nylon or
plastic string) to secure any loose portions.
Once the food is secure insert the skewer
into the motor. It is normal for the skewer to
flex when larger cuts of meat are being
cooked. It may also be necessary to
remove the grill rods for larger cuts of meat.
If the meat scrapes on the grill rods during
any part of the rotation, then the grill rods
OPERATING INSTRUCTIONS
must be removed. Adjust the counter
balance weight to balance the heavier
side of the meat and avoid lopsided
rotation of the rotisserie motor.
After your first use of the rotisserie burner
it is likely that the stainless steel adjacent
to the burner will darken to a dark blue
color. This is a normal property of the non-
rusting, type 304 stainless steel used on
the grill.
CAUTION: PLEASE TAKE OFF THE
WARMING RACK WHEN USING THE
ROTIS BURNER. THE HIGH HEAT
COMING FROM THE ROTIS BURNER
MAY CAUSE THE WARMING RACK TO
BEND.
Keep the rotisserie motor electric cord
away from the heated surfaces of the
grill. When not in use remove and
store the motor in a dry location.
WARNING:
ELECTRICAL GROUNDING
INSTRUCTIONS: This appliance
(rotisserie motor) is equipped with a
plug and should be plugged directly
into a properly grounded receptacle.
DO NOT cut or remove the grounding
prong from this plug.
13
GRILL LIGHTING INSTRUCTIONS
WARNING: IMPORTANT!
BEFORE LIGHTING…
Inspect the gas supply hose prior to
turning the gas “ON”. If there is evidence
of cuts, wear, or abrasion, it must be
replaced prior to use. Do not use the grill if
the odor of gas is present. Only the
pressure regulator and hose assembly
supplied with the unit should be used.
Never substitute regulators for those
supplied with the grill. If a replacement is
necessary, contact the factory for proper
replacement.
Screw the regulator (type QCC1) onto the
tank. Leak check the hose and regulator
connections with a soap and water
solution before operating the grill.