LOCATING HEATER FOR USE
WHEN HEATER IS ON:
The emitter screen will become bright due to intense heat. The color is more
visible at night.
The burner will display tongues of blue flame. These flames should not be all
yellow or produce thick black smoke, indicating an obstruction of airflow through
the burners. The flame should be blue with straight yellow tops.
The flame pattern at the emitter grid should be visually checked whenever heater
is operated (see figure 1). If flames extend more than 1/2 inch (12.7mm) beyond
surface of the emitter grid or reflector the heater should be turned off immediately
and the heater should not be operated again until repairs are made.
FIGURE 1
NORMAL FLAME POSITION
2” (50.8mm)
1” (25.4mm)
0” (0mm)
RELIGHTING
(A) Turn the control knob to off position.
(B) Wait five (5) minutes for gas to dissipate before attempting to relight the pilot.
(C)
Repeat steps beginning with step (D) on the previous page (Page. 10).
SHUT DOWN INSTRUCTIONS:
•
Turn control knob clockwise to ‘OFF’ position. The burner may make a slight
popping sound when extinguished. This is normal.
•
Turn propane tank gas valve clockwise to ‘OFF' position when heater is not in
use
Caution:
This patio Heater contains a Tilt Safety Switch which is designed to provide
safe use of the patio heater. The tilt safety switch will automatically shut-off the heater
when it tilts in the tip angle over 45-60 degrees from vertical position.
15
Содержание 920-0010
Страница 21: ......
