Nexgrill 920-0010, Инструкции по установке и руководства пользователя

Страница: 10 / 21

Assembly Instruction
STEP 12. Gas Tank Assembly
●
Open the Tank door, fit the bottom
of the gas tank into the hole in the
bottom of the Tank Enclosure. Note
that the valve connection on the gas
tank should be facing directly towards
the door opening.
STEP 14. Secure Gas Tank
●
Secure Gas Tank with the Tank Hook
by attaching to the Gas Tank Support,
as showed in diagram.
●
Secure the other Regulator End onto
Gas Tank until tight.
●
The LP-Gas supply cylinder must be
disconnected when this appliance is not
in use. Disconnect the gas tank by
turning the regulator counterclockwise.
CLO
SE
g
OP
EN
10
STEP 13. Tank hook assembly
z
4pcs 3/16 x 12 mm screws, 4pcs 3/16 x
12 washer flat washer are needed for this
assembly
z
There are 4 screws used to attach the
tank hook, Align with the holes in the tank
hook, Insert the screws and then tighten
up the screws to assemble the tank hook
on the back panel support, as shown in
the diagram.