Nexgrill 720-0958N, Руководство по эксплуатации

Страница: 11 / 24

Main burner
Main Burners
Control Knob, Label
Component Identification
11
Push In
2
3
Match Light
1. If the burner will not light after several attempts
then the burner can be match lit. Before using the
match, turn the knobs clockwise to OFF and allow 5
minutes for any accumulated gas to dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right next
to the burner ports on the designated burner. To
light the burners under the hotplate, first remove
the hotplate to allow accessibility of lighting rod
reaching the burner tube.
5. Push in and turn the designated control knob
anticlockwise to .
6. Burner should ignite immediately.
NOTE: Once lit, burners can be adjusted between
HIGH and LOW settings as desired.
OFF
HIGH
LOW
Side burner
Side Burner