Assembly Instructions
1. Caster Assembly
Turn over the bottom panel for assembling casters.
Mount the casters onto the bottom panel (L) using
sixteen 1/4-in. x 15-mm truss head screws with
locking washer (AA) and sixteen Flat washers (EE) .
The swivel caster with brake (Q) should be
positioned under the left rear of the cart bottom and
the swivel caster (P) should be positioned under
left front as shown in Fig. 1.
The two stationary casters (R ) should be
positioned under the right side.
Note:
The gap of the two stationary casters should
be facing the inside bottom panel.
2. Side Panel Assembly
Use three 1/4-in. x 15-mm truss head
screws with locking washer (AA) to connect
the bottom of the left side panel (I) to the
bottom panel (L). Make the left side panel
flush with the rear of bottom panel and
tighten the screws as shown in Fig. 2.
Repeat for the right side panel (H).
Fig. 2
L
16 x AA
16 x EE
R
P
Q
Fig. 1
I
6 x AA
L
H
3. Back Panel, bottom Assembly
a). Position the back panel, bottom (G) with the flat
side facing outward. Attach the back panel, bottom
(G) to the bottom panel (L) with three 1/4-in. x 15-
mm truss head screws with locking washer (AA)
as shown in Fig. 3.
b). Use four 1/4-in. x 15-mm truss head screws
with locking washer (AA) to connect the back
panel, bottom (G) to the right and left side
panels (H/I) as shown in Fig. 3
Fig. 3
G
L
AA
7X
I
H
13
