November 2017
Page 91
6.8.1. Edit Configuration Variables
This page allows you to view/set less common configuration variables, which cannot be changed
using the classic MCS web interface.
IMPORTANT:
This page is for advanced users only
– do not
use
unless you have been instructed exactly
by a NEXCOM representative on what values to change. Incorrect values may render the
router dysfunctional, or may cause difficulty to trace malfunctions.
Step
Action
1.
The following form will open to the right of the operation list:
2.
In the form, select a Section in the drop-down list. The Variable list will change
accordingly.
3.
Select a Variable in the drop-down list.
IMPORTANT:
Do not change [GLOBAL].AN_ID under any circumstance.
4.
Set/edit the Value field, then click
Set
.
