November 2017
Page 30
Width: There are 4 options for bandwidth selection. 2 options (
“
20MHz
”
and
“
40MHz
”
) are
used for AP or STA client mode. 2 options (
“
40 plus
”
and
“
40 minus
”
) are used for mesh mode
Transmit Power: There are 14 options.
3.3.9 Network Settings of Wi-Fi Interface
The network settings (network parameters of Wi-Fi interface) exists in this
“
Interface
Configuration
”
section.
Clicking “General Setup” tab
ESSID/Mesh ID:
(Default: “MESH_CAN2”)
Network name.
All products with the same ID (or network name) and radio physical settings (802.11 protocol and
channel) are connected together automatically.
Mode: (Default:
“
Mesh, 802.11s
”
) Wireless network topology. Only mesh is supported.
