manualshive.com logo in svg

Nexcom NDiS V1100, Руководство пользователя

Поделиться
Скачать
Nexcom NDiS V1100 Скачать руководство пользователя страница 59

Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.

45

NDiS V1100 User Manual 

Chapter 4: BIOS Setup

Advanced

Version 2.22.1282. Copyright (C) 2022 AMI

Aptio Setup - AMI

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are

connected. DISABLE option will
keep USB devices available
only for EFI applications.

USB Configuration

USB Module Version

Legacy USB Support

XHCI Hand-off

USB Mass Storage Driver Support

26

[Enabled]

[Enabled]

[Enabled]

Legacy USB Support

Enabled    Enables Legacy USB.
Auto 

  Disables support for Legacy when no USB devices are connected.

Disabled   Keeps USB devices available only for EFI applications.

XHCI Hand-off

This is a workaround for OSs that does not support XHCI hand-off. The 
XHCI ownership change should be claimed by the XHCI driver.

USB Mass Storage Driver Support

Enables or disables USB mass storage device driver support.

USB Configuration 

This section is used to configure USB parameters.

Advanced

Boot

Security

Save

 

&

 

Exit

Main

Version 2.22.1282. Copyright (C) 2022 AMI

Aptio Setup - AMI

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable UEFI Network

Stack

Network Stack

 

IPv4 PXE Support

  IPv6 PXE Support

[Enabled]

[Enabled]

[Disabled]

Network Stack

This section is used to configure the network stack.

Network Stack

Enables or disables UEFI network stack.

IPv4 PXE Support

Enables or disables IPv4 PXE support. If disabled, the IPv4 boot option will
not be created.

IPv6 PXE Support

Enables or disables IPv6 PXE support. If disabled, the IPv6 boot option will
not be created.

Содержание NDiS V1100






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды