Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
7
NCr-301-VHR User Manual
Chapter 2: Camera Configuration
Chapter 2: Camera Configuration
Accessing the Camera’s Configuration
Menu (Graphical User Interface)
The camera’s default IP address is 192.168.1.168, make sure the IP address
of the computer accessing the camera is on the same network subnet
before proceeding.
You can access the camera via a web browser or NexCam Assistant
software included with the camera. The following information outlines the
instructions for each method.
Installing NexCam Assistant
1. Locate the installation file
NexCamAssistant-Setup.msi
on the CD.
2. Once located, double click on the file to start the installation program.
3. Click the
Next
button on the welcome screen to continue.
Next button
Note: If NexCam Assistant is already installed, you can skip this section and
continue to the next section
NexCAM Assistant
on page 10.
