Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
MVS 5200/5210/MVS 5210-R Series & NANO 1190 NVR User Manual
16
Chapter 1: Main Console
Configure period setting:
After a new period has been inserted, a pop-up period setting
dialog will appear. Fill the start time and end time, and select
pre-alarm and post-alarm time if you want to set this period to
motion detection record mode.
Pre-alarm or post-alarm maximum value is 60 seconds.
4. Select a record mode:
Select a record mode ranging from “
Round the clock
“ or
“
Motion detection
”, “
DI detection
” or “
Event Detection
”
for this period.
If you select the “
DI
detection
” mode, you should select a DI
input source and define alarm condition.
5. Modify exist record schedule period:
Click a period from the weekday bar or select a period from the
list, then click the “
Configure
” button.
6. Remove a record schedule period:
Select a period from the weekday bar or list, then click the
“
Delete
” button.
7. Copy a period to all:
Select a period from then weekday bar or list, then click the
“
Copy
” button, system will copy the selected weekday’s periods
to all weekdays.
