Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
61
(M)PPC-240T-HW-01 User Manual
Chapter 4: BIOS Setup
VGA Support
If set to Auto, only install Legacy OpRom with Legacy OS and logo would
not be shown during POST. EFI driver will still be installed with EFI. This menu
item is only available when Fast Boot is enabled.
USB Support
Disabled
All USB devices will not be available until after OS boot.
Partial Initial
Specific USB port/device will not be available before OS
boot.
Full Initial
All USB devices will be available in OS and POST.
This menu item is only available when Fast Boot is enabled.
PS2 Devices Support
If set to Disabled, PS2 devices will be skipped during POST. This menu item
is only available when Fast Boot is enabled.
Network Stack Driver Support
If set to Disabled, network stack drivers will be skipped during POST. This
menu item is only available when Fast Boot is enabled.
Launch PXE OpROM
Enables or disables the boot option for legacy network devices.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Hard Drive BBS Priorities
Adjust the boot sequence of legacy devices.
Security
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Administrator Password
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User Will
have Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20
Administrator Password
User Password
HDD Security Configuration:
P0:TS128GMTS400
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
