Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
55
(M)PPC-240T-HW-01 User Manual
Chapter 4: BIOS Setup
IT8528 Super IO Configuration
This section is used to configure the serial port of the super IO.
Serial Port 0 Configuration
Enters the sub-menu of serial port 0 configuration.
Advanced
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port
0 (COMA)
IT8528 Super IO Configuration
Serial Port 0 Configuration
Serial Port 0 Configuration
Serial Port
Enables or disables the serial port.
Onboard Serial Port Mode
Configures the serial port mode to RS232, RS422 or RS485.
Terminal 120 Ohm
Enables or disables serial port terminal resistance.
Advanced
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 0 Configuration
Serial Port
Device Settings
Onboard Serial Port Mode
Terminal 120 Ohm
[Enabled]
IO=2F8h; IRQ=3;
[RS232]
[DISABLED]
