Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
29
FTA5180 Series User Manual
Chapter 3: BIOS Setup
Data Bits
The options are 7 and 8.
Parity
A parity bit can be sent with the data bits to detect some transmission errors.
Even
Parity bit is 0 if the number of 1’s in the data bits is even.
Odd
Parity bit is 0 if number of 1’s in the data bits is odd.
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the
beginning). The standard setting is 1 stop bit. Communication with slow
devices may require more than 1 stop bit.
Flow Control
Flow control can prevent data loss from buffer overflow. When sending data
and the receiving buffers are full, a “stop” signal can be sent to stop the
data flow.
VT-UTF8 Combo Key Support
Enables or disables VT-UTF8 combo key support.
Recorder Mode
When this field is enabled, only text will be sent. This is to capture the
terminal data.
Resolution 100x31
Enables or disables extended terminal resolution.
Putty Keypad
Selects the Putty keyboard emulation type.
PCI Subsystem Settings
This section is used to configure the PCI.
Above 4G Decoding
Enables or disables decoding of 64-bit devices in 4G address space.
SR-IOV Support
Enables or disables SR-IOV support
Advanced
Version 2.22.1283. Copyright (C) 2022 AMI
Aptio Setup - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables
64bit capable Devices
to be Decoded in Above
4G Address Space (Only
if System Supports 64
bit PCI Decoding).
PCI Bus Driver Version
PCI Devices Common Settings:
Above 4G Decoding
SR-IOV Support
PCI Express Settings
PCI Express GEN 2 Settings
A5.01.27
[Enabled]
[Enabled]
►
►
