Nexcom FTA 5180 Series Скачать руководство пользователя

Страница: 38 / 69

FTA5180 Series User Manual

Chapter 3: BIOS Setup

Trusted Computing

This section is used to configure Trusted Platform Module (TPM) settings.

Advanced

Aptio Setup - AMI

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

TPM 1.2 will restrict support

to TPM 1.2 devices, TPM 2.0

will restrict support to TPM 2.0

devices, Auto will support both

with the default set to TPM 2.0

devices if not found,

TPM 2.0 Device Found

Firmware Version:

Vendor:

Security Device

Support

Active PCR banks

Available PCR banks

SHA-1 PCR Bank

SHA256 PCR Bank

Pending operation

Platform Hierarchy

Storage Hierarchy

Endorsement

Herarchy

TPM2.0 UEFI Spec

Version

Physical Presence

Spec Version

TPM 2.0

7.62

IFX

[Enable]

SHA-1, SHA256

[Enabled]

[None]

[Enabled]

[TCG_2]

[1.3]

[TIS]

Security Device Support

Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.

SHA-1 PCR Bank

Enables or disables SHA-1 PCR Bank.

SHA256 PCR Bank

Enables or disables SHA256 PCR Bank

Pending operation

Schedules an operation for the security device.

Platform Hierarchy

Enables or disables Platform Hierarchy.

Storage Hierarchy

Enables or disables Storage Hierarchy.

Endorsement Hierarchy

Enables or disables Endorsement Hierarchy.

TPM2.0 UEFI Spec Version

Configures the TPM2.0 UEFI spec version.

Physical Presence Spec Version

Configures the physical presence spec version.

Device Select

TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support
to TPM 2.0 devices. Auto will support both TPM 1.2 and 2.0 devices with
the default set to TPM 2.0 devices if not found, and TPM 1.2 devices will be
enumerated.

Содержание FTA 5180 Series






































































Результаты поиска

Содержание FTA 5180 Series

Отзывы:

Похожие инструкции для FTA 5180 Series

Бренды по названию

Популярные бренды

Nexcom FTA 5180 Series, Руководство пользователя

Результаты поиска

Содержание FTA 5180 Series

Отзывы:

Похожие инструкции для FTA 5180 Series

Бренды по названию

Популярные бренды