Nexa NP-1060, Руководство пользователя

Страница: 19 / 39

Chapter 10: Installation
This is a 186.4 mm x 170 mm form factor motherboard. Before you install the motherboard, study the
configuration of your chassis to ensure that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the motherboard. Failure
to do so may cause physical injuries to you and damage to motherboard components.
10.1 Screw Holes
Place screws into the holes to secure the motherboard to the chassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
10.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard
settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity,
NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist
strap or touch a safety grounded object before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with
the component.
Before you install or remove any component, ensure that the power is switched off or the
power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals, and/or
components.