F
Firewall
113mm
B’
B
B=B’
A
A=A’
A’
! Engine thrust on balk head
is already adjust at factory
Attach the aluminum motor mounting
plate on to the motor and secure it in
place with four screws ( included with
motor set) (F).
TOP-VIEW /
Draufsicht
SIDE-VIEW /
Seitenansicht
Sturz und Zug beachten!
Sperrholztrager Platten zusammenkleben, wie gezeigt ausrichten
und Locher bohren.
Motor nach untenstehendem Schema einbauen.
Fur optimale Leistung empfehlen wir folgende Komponenten:
-Brushless-Motor PICHLER BOOST 60
-Brushless Regler PICHLER XQ-70
-LiPO Akku LEMONRC 3700-5S
-Luftschraube 12*6 - 13*8
For maximum performance, we recommended
the following:
-Brushless-Motor PICHLER BOOST 60
-Brushless Regler PICHLER XQ-70
-LiPO Battery LEMONRC 3700-5S
-Propeller 12*6 - 13*8
Throttle pushrod
FRONT
Elevator pushrod
Elevator servo
Rudder servo
(mini servo)
Throttle servo
BOARD - TOP VIEW
FUSELAGE - BOTTOM VIEW
FUSELAGE - BOTTOM VIEW
The holes for the rudder servo
are Pre-cut at factory (left and
right side of the fuselage).
Cut away only the covering
Akku Kiettband
aus dem
PICHLER
Sortiment
Best.Nr. C4739
Battery seat bell
X
Tipp
10A
10B
10C
DORNIER DO-27
9- Electric motor
continued
DORNIER DO-27
10- Servo & linkage
