-Switch on the radio (trims centered)
Then mount the ailerons servo horn
In neutral position.
-The servo horn should be
Perpendicular to the servo
YES
NO
Draw the center line
on the wing joiner
- Trial fit each part before gluing . Be certain that there are no gaps.
If the parts will join, but with a gaps, sand or trim the parts a little at
a time until the parts meet exactly with no gaps.
- Check for the correct dihedral angle
Before gluing:
- Draw the center line on the wing joiner.
Coat one half of the dihedral brace with
epoxy up to the center line.
A B
A B
30 min. Epoxy
Install the epoxy-coated side of
the dihedral brace into the wing
joiner cavity up to the center line.
Step 3:1
Step 3:2
Step 3:3
30 min. Epoxy
P-51 Voodoo
2- Aileron and flap linkages
3- Joining the wing
