Fire Bird V ATMEGA2560 Hardware Manual
5.5 Sharp IR Range sensor mounting
Step 1:
Cut the front section of white connector of the Sharp IR range sensor
Figure 5.7: Remove front cover of the white connector of the Sharp IR range sensor
Figure 5.8: Sharp IR range sensor mounting kit
Step 2:
Mount the 20mm studs on the main board, where sharp sensor is to be fitted. In figure
5.9, area highlighted with the red border shows the mounted studs from the Sharp IR range
sensor mounting kit.
Figure 5.9: Mount 20mm studs from the Sharp sensor mounting kit
© NEX Robotics Pvt. Ltd. and ERTS Lab, CSE, IIT Bombay, INDIA 93
