Newworld NWECO13FSW, Инструкция по эксплуатации

Страница: 25 / 40

Using your Dishwasher
Getting the most from your appliance
25
B efore using the appliance
D etergent usage
Only use detergents specifically designed for
domestic dishwashers.
Add the recommended amount of detergent for the
selected programme to ensure the best
performance.
Keep your detergents in cool, dry places out of
reach of children.
See the detergent manufacturer's instructions for a
further information.
F illing the detergent
Push the latch to open the dispenser and
pour in the detergent.
Close the lid and press it until it locks in place. The
dispenser should be refilled just before the start of
each programme. If the dishes are heavily soiled,
place additional detergent in the pre-wash detergent
chamber.
DETER
GENT
U sing combined detergents
These products should be used according to the
manufacturer's instructions.
Never put combined detergents into the interior
section or the cutlery basket.
Combined detergents contain not only the
detergent but also rinse-aid, salt replacement
substances and additional components depending
on the combination.
We recommend you do not use combined detergents
in short programmes.
Please use powder detergents in such programmes.
If you encounter problems when using combined
detergents, please contact the detergent
manufacturer.
When you stop using combined detergents, make
sure that water hardness and rinse aid settings are
set to correct level.
R inse - aid usage
Rinse-aid makes dishes sparkle and helps them to
dry without spotting. Rinse-aid is required for stain-
free utensils and clear glasses. Use only rinse-aid for
domestic dishwashers.
F illing the rinse - aid and setting
To fill the rinse aid compartment, open the rinse-aid
compartment cap. Fill the compartment with rinse aid
to the MAX level and then close the cap. Be careful
not to overfill the rinse aid compartment and wipe up
any spills.
In order to change the rinse aid level, follow the
below steps before turning on the machine:
•
Push the programme button and hold it down.
•
Turn on the machine.
•
Hold down the programme button until “rA”
disappears from the display. Rinse aid setting
follows water hardness setting.
•
The machine will display the last setting.
•
Set the level by pushing the programme button.
•
Switch off the machine to save the setting.
•
The factory setting is “4”.
If the dishes are not drying properly or are spotted, increase
the level. If blue stains form on your dishes, decrease level.
Level Brightener Dose Indicator
1 Rinse-aid not
dispensed
r1 is shown on the
display.
2 1 dose is
dispensed
r2 is shown on the
display.
3 2 doses are
dispensed
r3 is shown on the
display.
4 3 doses are
dispensed
r4 is shown on
the display.
5 4 doses are
dispensed
r5 is shown on the
display.
Using your Dishwasher
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these
instructions,
or online at XXX newworldassist DP .uk If you still require further assistance, call one of our experts on 33 305 2263 .