Newworld NWECO13FSW, Инструкция по эксплуатации

Страница: 16 / 40

Installing your Dishwasher
Bringing it all together
16
Electrical Connection
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Drain Hose Connection
Connect water drain hose directly to water
drain hole or to the sink outlet spigot. This
connection should be minimum 50cm and
maximum 110cm from floor plane.
IMPORTANT: Items will not wash properly if a
drain hose longer than 4m is used.
Installing your Dishwasher
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these
instructions,
or online at XXX newworldassist DP .uk If you still require further assistance, call one of our experts on 33 305 2263 .
WARNING: Your machine is set
operates at 220-240V If the mains voltage
supply to your machine is 110V connect a
transformer of 110/220V and 3000 W
between the electrical connection
The earthed plug of the
machine must be connected to an earthed
outlet supplied by suitable voltage and
current.
In the absence of earthing
installation, an authorised electrician should
carry out an earthing installation. In the case
of use without earthing installed, we will not
be responsible for any loss of use that may
occur.
The indoor fuse current value
should be 10-1 3 A
Machine should be installed by authorised
service agent or similarly qualified persons
only.