Newworld NWECO13FSW, Инструкция по эксплуатации

Страница: 17 / 40

Installing your Dishwasher
Bringing it all together
17
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Installing your Dishwasher
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these
instructions,
or online at XXX newworldassist DP .uk If you still require further assistance, call one of our experts on 33 305 2263 .
Fitting the machine undercounter
If you wish to fit your machine
undercounter, there must be sufficient
space to do so and the wiring-plumbing
must be suitable to do so (1). If the space
under the countertop os suitable for fitting
your machine, remove the worktop as
shown in the illustration (2).
WARNING: The countertop, of
which the machine will be placed under,
must be stable in order to prevent
imbalance.
The top panel of the dishwasher must be
removed to fit the machine under the
counter.
To remove the top panel, remove the
screws that hold it on, located at the rear
of the machine. Then, push the panel 1cm
from the front towards the rear and lift it.
Adjust the machine feet according to the
slope of the floor (3).
Fit your machine by pushing it under the
counter, taking care not to crush or bend
the hoses (4).
WARNING: After removing the top
panel of your dishwasher, the machine
should be placed in a space of the
dimensions shown in the following figure.
A: If there is no felt on the top of the product, you
should take into account this product height
B1: If there is felt on top of the product with 2nd
basket, you should take into account this product
height.
B2: Is there is felt on top of the product with 3rd
basket, you should take into account this product
height.