
9
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
III. Installation Instructions
Location
•
When selecting a position for your Fridge you should make sure the floor is flat and fir
m,
and the room is well ventilated with an average room temperature of between 16º C and
38º C.
• Avoid locating your Fridge near a heat source, eg, cooker, boiler or radiator. Also avoid
direct sunlight in out-buildings or sun lounges. If you are placing your Fridge in an out-
building such as a garage or annex ensure that the Fridge is placed above the damp
course, otherwise condensation will occur on the Fridge cabinet.
•
Never place the Fridge in a wall recessed or into fitted cabinets or fur
niture when your
Fridge is working, the grills at the back may become hot and the sides warm. It must
therefore be installed so that the back of the Fridge has at least 9 cm (31/2”) of free
space and the sides have 2 cm (3/4”).
• Do not drape the Fridge with any covering.
Leveling the Fridge
• If the Fridge is not level, the door and magnetic seal alignment will be affected and may
cause you Fridge to work incorrectly
. Once the Fridge is placed in its final location, adjust
the leveling feet at the front by turning them until you have a leveled appliance.
Cleaning before use
• Wipe the inside of the Fridge with a weak solution of bicarbonate of soda. Then rinse
with warm water using a damp sponge or cloth. Wash the baskets or shelves in warm
soapy water and dry completely before replacing in the Fridge. The external parts of the
Fridge can be cleaned with wax polish.
Before plugging in
• IMPORTANT: Check that you have a socket which is compatible with the plug supplied
with the Fridge.
Before switching on
• IMPORTANT: After the refrigerator is properly installed and well cleaned, do not switch it
on immediately. Make sure you allow a minimum of 4 hours before turning on the power
of the refrigerator
. The coolant fluid needs time to settle. If the appliance is switched off at
any time, wait 30 minutes before switching back on to allow the coolant fluid to settle
Before filling your Fridge
• Before storing foods in your Fridge, turn the Fridge on and wait for 24 hours to make sure
it is working properly and to allow the Fridge to reach the desired temperature.