1 3
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
V. Troubleshooting and Maintenance
Troubleshooting
• If Power Cut?
> Do not open the Fridge door more than necessary.
• The Fridge is exceptionally cold?
– You may have accidentally adjusted the thermostat control dial to a higher position.
• The Fridge is exceptionally warm?
– The compressor may not be working. Turn the thermostat control dial to the maximum
setting and wait a few minutes. If there is no humming noise, it is not working. Contact
your after sales service provider.
• The Fridge is not working?
– Check it is plugged in and switched on. Check that the fuse in the plug has not blown.
– The Fridge should be placed in a well ventilated room with an ambient temperature of
between 16º C and 38º C. Leave the Fridge for 30 minutes. If this doesn’t resolve your
problem, please contact your after sales service provider.
• Condensation appears on the outside of the Fridge?
– This may be due to a change in the room temperature. Wipe off any residue moisture.
If the problem continues contact your after sales service provider.
• Hearing noises such as Gurgling or Whooshing?
– These noises are caused by the circulation of the refrigerant liquid in the cooling
system. It has become more pronounced since the introduction of CFC free gases. This
is not a fault and will not affect the performance of your Fridge.
• Hearing noises such as humming, purring or pulsating?
– This is the compressor motor working, as it pumps the refrigerant around the system.