1 0
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
IV.
Starting
y
ou
r
Fridge
1. Clean the parts of the refrigerator with lukewarm clean water containing a neutral
detergent, then wipe them dry.
NOTE: Electric parts of the refrigerator can only be wiped by a dry cloth.
2. Turn the thermostat knob to the "3" position, then turn on electricity. The compressor and
the light inside the refrigerator will begin to work.
3. Open the door 30 minutes later, if the temperature in the refrigerator decreased
obviously, it shows that the refrigerator system works well. When the refrigerator operates
for a period of time, the temperature controller will automatically set the temperature
based on the thermostat level selected.
NOTE
: The Fridge/Freezer may not operate at the correct temperature if it is in a particularly
hot or cold room or is you open the Fridge/Freezer door too often
Temperature Control Dial
Temperature Control
1. The temperature in the refrigerator compartment is controlled by the temperature
controller installed on the side wall of the refrigerator compartment.
2. By turning the thermostat knob right or left, you can regulate the temperature inside the
refrigerator.
3. The marks on the knob are the temperature grades, not the number of the degrees of
temperature.”OFF” shows a forced STOP and “7” shows the lowest temperature. Turn the
knob from "1" position to "7" position, the temperature decreases continuously. You may
set the temperature control selector to any position according to what you need.
4. We recommend to set the selector to "4" position for normal, everyday use.