Newworld NW 50GSO Blk/444443994, Инструкции по эксплуатации и монтажу, Страница: 14 / 29

3.7 CONVERTING THE GAS
Caution : The following procedures must be undertaken by authorized service
people.
Your appliance can be adjusted to operate with LPG or Natural Gas. The burners can be
altered to work with different types of gas by switching their injectors and adjusting the
minimum flame length suitable to the gas in use. To change the injectors, these steps must
be followed:
Changing injectors:
Hob Burners:
• Cut off the main gas supply and unplug from the electric mains.
• Remove the burner cap and the adapter(Figure 8).
• Unscrew the injectors. For this, use a 7mm spanner(Figure 9).
• Replace the injector with the ones from the gas conversion kit, with corresponding
diameters suitable to the type of gas that is going to be used, according to the
information chart (which is also supplied in the gas conversion kit).
Changing the oven/grill injectors
T he oven and grill injectors are assembled by a single screw that is on the tip of the burner.
Grill injector:
For grill burners, this screw is already visible (Figure 10). Remove the screw and pull the
grill burner towards you and you will see the injector revealed on the rear surface of the
oven cavity (Figure 11 on the next page).
Figure 8
Figure 9
Injector
Spanner