INSTALLATION INSTRUCTIONS
Any electrical work required to
install this appliance should be car-
ried out by a qualified electrician or
competent person. This appliance
must be earthed. The manufacturer
declines any liability should these
safety measures not be observed.
Before switching on, make sure the elec-
tricity supply voltage is the same as that
indicated on the appliance data badge.
The appliance is supplied with a 13 amp
plug fitted. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used. Should the plug need to
be replaced for any reason. The wires in
the mains lead are coloured in accor-
dance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
The wire coloured green and yellow must
be connected to the terminal marked
with the letter “E“ or by the earth sym-
bol
or coloured green and yellow.
The wire coloured blue must be connect-
ed to the terminal “N“. The wire coloured
brown must be connected to the termi-
nal marked “L“.
Upon completion there must be no cut,
or stray strands of wire present and the
cord clamp must be secure over the
outer sheath.
Important!
The plug must still be accessible after
the appliance has been installed. The
appliance should not be connected to the
electrical supply by means of an exten-
sion cable. In case that the electrical
cable has to be replaced, please contact
the Customer Care Centre and arrange a
service engineers visit.
Warning!
A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard.
Ensure that it is disposed of safely.
This appliance complies with the follow-
ing E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage
Directive) and subsequent modifications,
89/336 EEC of 03.05.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
E
(Earth)
GREEN / YELLOW
L
(Live)
BROWN
N
(Neutral)
BLUE
Cable
clamp
22
