CLEANING
Just like all new appliances or tableware, Thermo
Chef Natura should be cleaned thoroughly before use,
especially the blade, bowl cover, scraper, blending
bowl and basket filter.
How to clean the blender bowl and the
bowl lid
Now, clean the inside and outside of the bowl with hot
water (not including the blade) (picture 1)
Wash the scraper shaft, butterfly bar, basket filter,
measuring cup, bowl lid and steamer.If there are sticky
substances which are not easy to clear away on the
stainless steel part of the blending bowl, please use
stainless steel detergent to help clean it.
Alternatively you can mix 2 tbs of Bi Carb Soda, 2 tsp
of lemon juice with one litre of water and allow to soak
in the blender jar for a couple of hours. To remove
any odour that may occur in the lid it can be soaked
in water and vinegar overnight or placed in the freezer
overnight.
How to clean blade base:
Hold the base bottom and wash it under the water with
blade up towards ( picture 2), or clean it with brush or
in the Dish Washer.
How to clean steamer
Clean the steamer, steaming mesh and the cover with
warm soapy water or in the dish washer.
Clean them with soft cloth and moderate detergent
(picture3). Do not use sharp articles or steel brush to
avoid scratches.
do not use dish washer to wash the blending bowl or
sharp articles to help clean any part so as to avoid
damage of the appliance or any safety risks.
!
Please do not wash the blades in the dish washer for
a long time, or else the shaft gasket would be
damaged.
22
NOTICE
IMPORTANT NOTICE
