Copyright Velocomp LLP 2005-2015
6
PART TWO: BASIC OPERATION
USING THE NEWTON WITH ISAAC SOFTWARE
Your Newton Power Cycling Computer works in tandem with ISAAC ride analysis software
for Mac/PC. Think of ISAAC as the software “brains” behind Newton…
☺
We strongly suggest that you download and install ISAAC before proceeding with
these instructions.
With ISAAC installed on your computer it will make it easier to
understand and use your Newton
HOW TO INSTALL ISAAC SOFTWARE FOR MAC/PC
•
Download ISAAC software from
https://www.ibikesports.com/index.php/downloads/
Or, if you have previously installed ISAAC on your computer, make sure it is the latest
version:
•
in the ISAAC menu, go to “Help/Check Online for Software Update”
SETTING DATE AND TIME IN YOUR NEWTON
Connect your Newton to your computer, awaken the Newton from sleep (click any button),
and launch the ISAAC software application.
Date and time are automatically set by ISAAC
each time you connect your Newton to ISAAC
.
NOTE
: IF YOU REBOOT YOUR NEWTON WITH A “HARD RESET” (SEE PAGE 19-20) YOUR
DATE AND TIME WILL BE LOST UNTIL YOU RECONNECT YOUR NEWTON TO ISAAC.
FIRMWARE AND SERIAL NUMBER
Your Newton’s serial number and firmware version are stored inside its computer memory.
Use ISAAC to obtain your serial number and Firmware version. Connect your Newton to
ISAAC, click any button on your Newton to wake it up, and go to Device/SN and FW
version…