NewTek TimeWarp TW-4, Руководство пользователя

Страница: 51 / 126

Page | 43
Figure 36
likely be forgiven for never using another Knob Set mode.
Generally speaking, the alternative Knob Set modes provide access to deeper audio configuration
options and settings. We’ll provide the details of their use in context as we go along.
4.3.6 BALANCE/PAN CONTROL
Several controls are nested above each fader, along with the matching
OLED display group for that audio input or source. Looking at Figure 35
you’ll notice that in the default operating mode (
PAN
; See the previous
section) the Line 1 display shows a VU meter at left, and a Balance graph
below the input label.
Rotate the knob below the balance graph display to adjust Balance for this
source (or, for audio sources set to Mic input types in TriCaster’s Audio Mixer , to
adjust the Pan setting for the corresponding channel).
4.3.7 MONO/TALK
In
PAN
mode, push the small
ON
button to the left of the knob to turn on the Mono switch for the
associated TriCaster audio source. Push it again to disable Mono, or – for Mic sources – the Talk
(Talk Over) feature.
4.3.8 SOLO & MUTE
Two larger buttons labeled
SOLO
and
ON
( Mute ) are positioned below
the knob; that is, above each of the eight faders (Figure 36).
These two buttons are outside the Knob Set group, and thus independent
of the mode established by the of Knob Set selectors. That’s just a wordy way of
explaining how it is that the
SOLO buttons
always toggle the Solo feature for their respective
sources; and likewise the
ON
( Mute ) buttons always mute or un-mute them – even when you
might be in a different mode.
Figure 35