Newtech Flovend 1, Руководство пользователя

Страница: 28 / 30

Автомат продажи живых цветов «ФЛОВЕНД»
-
Руководство по эксплуатации
27/30
27
8. Machine’s technical characteristics
8.1. Technical characteristics
The machine corresponds to the execution of UHL 4 according to GOST 15150-69 "Ma-
chines, instruments and other technical units. Machine’s for different climatic regions. Categories,
service conditions, storage and transportation in terms of the climatic factors of the environment",
but for operation at temperatures from +5 to +35 °C.
The machine works on AC current 50 Hz, voltage ~220V±10%, with compulsory ground contact.
Maximum consumption current,
А
: 4;
Maximum consumption power, V: 800.
8.2. Mass-dimensional characteristics
Parameter, measurement unit
Dimension
Height, mm:
2030
Width, mm:
800
Depth, mm:
1225
Gross weight, kg, not more:
341
Net weight, kg, not more
300
8.3. Operating conditions
The machine must be installed on a flat hard horizontal surface avoiding vibration and sudden
jolts. Canting angle should not exceed 10 degrees in any plane. The operation of the machine is al-
lowed without frequent sharp temperature changes. Any liquids and metal objects must be avoided
inside the machine, as well as integral part breaking for any purpose.
It is recommended to switch on the machine not earlier than 2 hours after taking the machine into
the room after long staying in the wet room.
8.4. Transportation and storage
During transportation the temperature of the environment must be from 30 to +40°
С
.
Storage conditions must correspond to 1 group (L) according to GOST 15150.
Transportation must be executed in package to prevent from vibration and sudden jerks. Ex-
clude any liquids and foreign objects inside the package.
Temperature and moisture conditions must correspond to operation conditions.