Newtech Flovend 1, Руководство пользователя

Страница: 9 / 30

Автомат продажи живых цветов «ФЛОВЕНД»
-
Руководство по эксплуатации
8/30
8
2. Machine pre-starting procedures
2.1. Installation
Flower vending machine «Flovend» i
2.2. Connection
s mounted on any flat horizontal surface right under its
width and depth (see section 7). Body should not deviate more than 10 degrees in any plane during
operation; otherwise there can be random distribution of the liquid in the display bowls. Refrigera-
tion unit must be provided with the clearance between the back of the machine and the wall at least
40 cm for normal operation. After installation fix the wheels with the brake.
Power connection of the flower vending machine must be connected to the socket with the
grounded contact (CEE plug). Voltage supply must correspond to the technical characteristics of the
machine (see section 7). Recommended to connect the machine through the network filter, compat-
ible with the electrical characteristics of the machine power.
You must install a SIM card in the card holder located on the control board (see figure 3, POS. 10)
for statistics operation module. Along with it, PIN code must be disabled.
Pic. 3
For flower vending machine operation turn on the emergency stop switch 1 and RCD 2 (Fig.
2) at the electrical panel 17 (Fig. 4, Fig.2) located inside the machine. Wait about a minute for full
switching. After initialization of all devices, temperature and time data are read, errors are checked.