INETVU® MOBILE SYSTEM QUICK START
– NEWTEC MDM3X00
C-COM Satellite Systems Inc.
Page 5
1.3
Pre-Configuration Check List
The following items should be known prior to configuring the iNetVu® Mobile System. Contact the
Service Provider or Network Operation Center (NOC) if any of the following items are unknown or if you
are unfamiliar with them.
Note:
The modem will arrive having been already pre-pointed and executed by the
integrator/service provider. If the pointing procedure has not been already executed
contact your service provider or refer to the Newtec User Manual for pointing procedure.
Service Type
Modem Type
Modem
F/W
InetVu F/W
iNetVu S/W
Interface
Newtec
**MDM3X00
3.1.0.33+
7.5.10 beta+ 7.5.10 beta+ AMIP
Note:
Installed iNetVu Software and Controller Firmware versions
MUST
be identical for normal operation
IP Address of Satellite Modem
Satellite Name and Coordinate
DVB Carrier(s) if available
Transmit and Receive Polarization (Horizontal/Vertical)
BUC size and Antenna size (Outdoor Unit)
ACU Interface TCP Port (2002 for the iNetVu ACU)
** MDM3X00 modems include both the MDM3100 and MDM3300 types.
