Physical Description
User Manual for AZ430 WAN Satellite Modem
3.2
Back Panel Description
The figure below shows the possible connections on the modulator. The back
panel connections available depend on the specific hardware configuration of your
device. The back panel consists of several hardware modules. In the following
paragraphs these modules are described in more detail.
Figure 4 -AZ430 Telco Satellite Modem back panel connections
3.2.1
PSU, M&C Interface and External 10.0 MHz Reference Input
ALARM
10/100Base-T
Ref. In
M&C RS232/485
100-
26
0 VA
C
L
IN
E
Figure 5 - PSU, Monitor and Control and External 10 MHz reference
Power socket
This has a protective earthing incorporated in the power cord. Insert the mains plug
only in a socket that has a protective earth contact. Any interruption of the
protective conductor inside or outside the instrument is likely to make the
instrument dangerous.
Serial Monitoring and Control via RS485/RS232
MON & CTRL
5
9
1
6
Figure 6 – Monitoring and Control Contacts
version 1.0
7
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
