ECOLINER™ II
ALWAYS wear safety goggles or protective eye-wear when operating the unit!
1700 Jasper St., Unit F, Aurora, CO 80011
T
800.624.6706
F
303.364.7796
•
Newstripe.com
EcoLiner™ II Manual / 4620.0517
Page 1 of 11
PRECAUTIONARY WARNING!
Please read and understand all operation instructions as detailed
in this manual. Failure to follow specified instructions may result in
equipment damage or serious injury to personnel up to and
including death!
DO NOT use oil, petroleum, primer or base coat paints in the
EcoLiner™™ II.
ALWAYS STRAIN THE PAINT. Field marking paint often has oversized
material, lumps, skin, etc., in it. If not strained, these contaminates
will be drawn into the pump, shut-off valve, lines, etc., and will cause
problems.
THIN THE PAINT BEFORE adding it to the pail for the ECOLINER™™.
Almost all field marking paints MUST BE THINNED before using them
with the ECOLINER™™. These paints are typically thinned at ratios of
1:1 (One-gallon of water to one-gallon of paint) up to 3:1.
NEVER perform maintenance on the machine while the system is
running.
The gas On/Off lever should always be OFF when the machine is not
being used.
DO NOT run the pump dry after cleaning.
Please note that modifying, changing or servicing any portion of the
machine, system or components outside of the procedures and parts
outlined in the owner’s manual will VOID the warranty.
Use only in well-ventilated area.
Always consult your Facility Safety and/or Personnel Department
for specified safety protocols prior to operating this equipment.
