ECOLINER™ II
ALWAYS wear safety goggles or protective eye-wear when operating the unit!
1700 Jasper St., Unit F, Aurora, CO 80011
T
800.624.6706
F
303.364.7796
•
Newstripe.com
EcoLiner™ II Manual / 4620.0517
Page 2 of 11
ASSEMBLY
1.
The EcoLiner™ II is shipped mostly assembled. You are only required to attach the spray gun
assembly and paint hose.
2.
Slide Support Arm with side plates through mounting tube on front of chassis.
3.
Tighten down Star Knobs.
4.
Mount Spray Gun Mounting Arm on Support Arm with spray hose connection facing rearward.
5.
Tighten Star Knob.
6.
Line width is adjusted by raising or lowering Spray Gun and selecting the appropriate Spray Nozzle.
7.
Connect Paint Hose from Pressure Valve Cross to Spray Gun. Tighten lightly with wrench.
8.
CHECK ENGINE OIL. FILL WITH HIGH QUALITY 10W30 DETERGENT MOTOR OIL. Use high quality
10W30 detergent motor oil. Fill level is between the cross hatched markings on the dipstick with
the dipstick pushed against the fill port. (Not screwed in.)
Your EcoLiner II box should include:
Support arm for spray gun with left & right
side spray shields
Gun mounting Bar
Spray gun assembly
Nozzles, 5002 (2”-3” lines) and 9005 (5”-6”
lines)
Pail paint strainer
Owner’s Manual
Pic 1
