Newport X-32lb, Руководство пользователя

Страница: 6 / 13

6
How to Control the Motor
On/Off Speed Control
Rotate handle clockwise to obtain any of the 5 forward speeds. Rotate handle anticlockwise for any of the 3
reverse speeds. To stop the motor from running, position the handle following the arrow marker and position on
level 0.
Battery Level Indicator
There are 10 LED lights on the top cover. When seven (7) LED’s are out, the meter is indicating that the input
voltage is less than 9.5V (normal voltage draw, 12V). It is advised to disconnect the motor from the battery to
prevent damage to the battery and recharge.
Adjusting Motor Depth
Position the depth adjustment collar so the propeller blades will be submerged 150mm - 300mm (6inches -
12inches) below the water’s surface.
Raising the Motor
It is recommended to disconnect the battery before carrying out this procedure to prevent accidental running of
the motor. To raise the motor out of the water push and hold the tilt lever and with the other hand push down on
the end of the handle to bring the motor up and out of the water. T hen release the tilt lever to lock in place.
Lowering the Motor
It is recommended to disconnect the battery before carrying out this procedure to prevent accidental running of
the motor. Press the tilt lever whilst with the other hand; hold onto the end of the handle to steady the motor into
the water. Once motor is lowered release the tilt lever to lock into position.
Remember always disconnect from the battery(s) once the motor leaves water as a rotating
propeller can cause personal injury.
Remember to wash the motor by using fresh water after being used in salt water as it
can greatly reduce the possibility of corrosion.