Newport Pt16, Руководство оператора

Страница: 6 / 72

PLATINUM Series Controllers User’s Guide
6 Introduction
Table 1 – 10-Pin Input Connector Wiring Summary ................................................................................... 11
Table 2 – Interfacing Sensors to the Input Connector ................................................................................ 11
Table 3 – Output Type Designations for Base Output Connector. ............................................................. 13
Table 4 – 8 Pin Output/Power Connector Wiring Summary by Configuration. .......................................... 13
Table 5 – 6 Pin Output Expansion Board Connector Wiring Summary by Configuration. .......................... 14
Table 6 – Definitions for Abbreviations in Table 4. ..................................................................................... 14
Table 7 – Alarm Range Option Comparison ................................................................................................ 45
Table 8 – Ranges and Accuracies for Supported Inputs ......................................................................... 69
Table 9 – Error Code Descriptions .............................................................................................................. 69
Using This Manual
Section 3 of the manual will cover the back panel connections and wiring instructions. A quick overview
of how to navigate the PLATINUM
TM
Series menu structure follows in Section 4 . This is followed in
Section 5 by the complete PLATINUM
TM
Series meter menu tree. Remember, not all commands and
parameters in that menu tree will show up on your unit, as those that are not available with your
configuration are automatically hidden. Repetitive menu structures are highlighted in gray and only
shown once but are used multiple times; examples include scaling process inputs for the different
process input ranges, setting up the data communications protocol for each of the communications
channels, configuration for multiple outputs, etc.
This manual is optimized for online use. Therefore, the blue entries in the Section 2 menu tree are
hyperlinks that go straight to the corresponding reference section entry when clicked. The Reference
Section—encompassing Initialization Mode in
Section 6 , Programming Mode in Section 7 , and Operating
Mode in Section 8 —will provide more detail on what parameter and command preferences; such as
how they operate, and why to choose a specific value. There are also blue cross-references embedded in
the Reference Section (the blue section headers however, are not hyperlinks). In addition, the Table of
Contents on pages 3 through 6 are hyperlinked.