Newport New Focus 3502, Руководство пользователя

Страница: 30 / 51

28
Set: RECALL
The user may recall an instrument setup in one of two ways. Firstly, on power
up, the instrument will recall the last control settings used.
Secondly, a previously stored setup can be recalled by pressing the Set button
until the RECALL LED is lit. The up and down arrow keys are used to select the
instrument setup number, again, ranging from 0 to 9. Press the left or right
arrow key to recall the displayed instrument setup. The display will blink when
the recall process is complete. Location 0 is reserved for the factory default
settings.
Set: Default Settings
Location 0 is reserved for the factory default settings: Wheel is set to 42/30 , Sync
is set to INT , Mode is set to NORMAL , and the internal synthesizer frequency is set
to 84 Hz.
Measure Button
The Measure button is used to select which frequency measurement ( F
sync
, F
outer
,
OUT 1 or OUT 2 ) is displayed on the front panel. The instrument will continue to
measure and update the display until another function key is pressed. To change
the parameter to be measured, press the
Measure button until the LED lights
under the desired parameter.
UNLCK LED
The red UNLCK LED indicates when the Chopper is not synchronized to an
internal or external sync frequency. In addition, the UNLCK LED will blink
when an external sync frequency exceeds the limits for a particular wheel.
USB LED
The USB LED lights when the Chopper Controller is connected to a computer.