CONEX-CC
Controller GUI Manual
2.0
Installation
2.1
Install CONEX-CC Graphical User Interface
Following are steps to install CONEX-CC GUI.
•
For 32 bit, Select and launch “CONEX-CC Utility Installer Win32.exe”. For 64
bit, Select and launch “CONEX-CC Utility Installer Win64.exe”.
•
A window opens up showing Install welcome page.
•
Click on “Next”.
•
A window opens up allowing destination folder selection. By default it is showing
C:\.
•
Click on “Next”.
•
Ready to install window opens up. Click “Install”.
•
Then installation starts, wait for completion. Click on “Finish” to finalize the
installation.
32 bit installer will be installed “Newport.CONEXCC.CommandInterface.dll” in
GAC_32 folder and 64 bit installer will be installed the dll in GAC_64 folder.
NOTE
LabVIEW user can add reference of command interface dll from GAC during VI
creation.
2.2
Launch GUI
From Windows “START” menu, select “All Programs\Newport\Motion
Control\CONEX-CC\CONEXCC Utility”.
3
EDH0277En1041 — 10/17
