CONEX-CC
Controller GUI Manual
4.3
Tracking
The Tracking tab accesses the position tracking mode. The tracking position mode
uses the mouse.
NOTE
In the tracking mode, the cursor is confined to the tracking position area.
The “Enable/Disable” button executes the next enable command to change the
controller status. Its name changes in relation to the controller state. To see the
different controller states, refer to the controller state diagram in section 1.3.
An LED icon shows the current controller state. When the mouse hovers over
the LED icon, the controller state is displayed inside an information balloon.
Two text boxes display the current positions (X and Y)
The combo box allows memorizing the positions with a mouse double-click.
Each of these positions can be renamed or deleted. To execute an absolute
move to go to one of these memorized positions, select one item from the
combo box and click on “Go to” button. When the mouse moves over to the
combo box, the positions of the selected memorized position are showed in an
information balloon.
Rename a memorized position:
Select an item from the combo box, edit the
position name to change it and click on the “Rename” button to save the new
position name.
EDH0277En1041 — 10/17
10
