CONEX-AGAP Agilis-D
Controller
with Strain Gages Feedback
CONEX-AGAP
Agilis-D Controller with Strain Gages Feedback
1.0
Introduction
1.1
Purpose
The purpose of this document is to provide instructions on how to use the CONEX-
AGAP LabVIEW driver.
This document shows:
How to connect with a selected instrument
How to use a function from the Command Interface library
How to disconnect the connected instrument.
1.2
Overview
The CONEX-AGAP LabVIEW driver allows developing a LabVIEW program for a
CONEX-AGAP controller in the NSTRUCT environment.
The Newport LabVIEW driver for CONEX-AGAP uses the .NET assembly named
Newport.ConexAGAP.CommandInterface.DLL.
The current Newport LabVIEW driver structure has been implemented following the
National Instruments instructions on “Loading .NET …” as reported in §4.0.
1.3
Install LabVIEW 2010
The LabVIEW 2010 from National Instruments must be installed on your computer.
1.4
Download and Install Newport NSTRUCT
If the Newport NSTRUCT application is not installed on your computer then
download it from the Newport web site:
http://www.newport.com
Menu to select for downloading:
SALES & SUPPORTS > Softwares & Download > NSTRUCT Software & Applets
1.5
Run Newport NSTRUCT Server
The Newport NSTRUCT server must be running before to develop with LabVIEW.
It’s the main condition to use the Newport LabVIEW driver.
EDH0293En1020 — 09/12
Page
1
