Newport Electronics i Series, Руководство оператора

Страница: 15 / 56

This device may have a programmable communication output. The RS-232 and
RS-485 Output Connection are shown below.
Figure 2.11
a) RS-232 Output Wiring Hookup
b) RS-485 Output Wiring Hookup
This meter is capable of supplying 5 or 10 Vdc sensor excitation. The excitation
output connection and location of S2 pin selection jumper are shown below.
If your meter has an excitation option, then communication is not available.
Figure 2.12
a) Excitation Output b) Top View Location of S2
c) Top View Location of S2
on
1
/
8
DIN Compact Unit
11
Install jumpers according to the table below.
Table 2.4 Jumper Connections
Excitation Output S2
A B
10 V Close Open
5 V Open Close
Factory default is 10 V.