NewMar King Aire Diesel Pusher 2013, Руководство пользователя, Страница: 65 / 137

2013 King Aire Diesel Pusher
by Newmar
64
Exterior Entertainment Center
For your convenience and pleasure, an Exterior
Entertainment Center is an available option on the King
Aire. This entertainment center features a LCD flat screen
television mounted on a pivoting bracket for ease of
viewing, and an AM/FM/CD stereo and speakers to
provide outside music when desired.
The LCD television is mounted on a swivel bracket that allows you to swing the TV out and away
from the basement compartment, and to swivel it to allow for better viewing angles. To release
the television from its retainers, grasp the sides of the TV firmly and pull it directly toward you. It
will release and swing freely to the desired viewing position. To store the TV for travel, swing it
back into the opening, taking care to align the retaining brackets on the back of the TV with the
catches mounted on the bracket wall. Press the television firmly into place until the catches have
snapped into place and the TV is flush in the opening.
The external stereo can be used to listen to AM and FM broadcasts, and to play CD’ s. It has the
same functions and features as your in-dash stereo.
The LCD TV in the exterior entertainment center can be played through the exterior stereo. Press
the “source” button on the stereo until the audio program from the TV is heard.
Security Lights
Standard on this unit are exterior security lights. One is installed on each side of the coach. These
lights help to light the side of the unit for added protection and convenience. The lights are
activated by rocker switches located in the front overhead cabinet, labeled “Security Lights”.
Electric Steps
This unit may be equipped with electric double entrance door steps. If so, the switch to operate
these steps may be located in an overhead cabinet above the entrance door. When the power
switch for the steps is in the on position, simply open the door and the steps will open. Detailed
operation for the electrical entrance door steps is as follows:
1.
Turn the step power switch on.
2.
Close the door. The step should retract and lock into the closed position.
3.
Open the door. The step should extend and lock into the open position.
4.
Turn the step power switch off. The step should remain in the extended position when the
door is closed.
5.
With the step extended, turn the step power switch off and close the entrance door. Turn the
vehicle ignition on. The ignition override system will go into effect, and the step will
automatically retract.